lunaled

LED-Replacement Bulb for Hella Marine, Perko and Aqua Signal
Navigation Lights.
The LunaLed light designed to replace the 10/25 watt anchor bulb in
vessels up to 65’ with a visibility range to 3nm. The bulb has the
regular double contact index socket. The housing is polished
aluminium. The regulating circuit board is shed in black epoxy resin
and 100% waterproof. Estimated lifetime 100.00 hours. The LEDs
are the latest generation, providing 20.000mcd (Millicandel)
brightness each, which means a total amount of 540.000 mcd. There
is no polarity to take care of, so Customer Installation is easy. The
consumption is approx. at 0,11 Ampere/12Volt, or 0,05 Ampere
/24 Volt cutting power surge down to about 10 % of a standard
wolfram bulb!
Though the bulb fits perfectly into the Tri-and Bi-color lights
as well. But it not yet certified to be used in these
applications as the angle of the light would not be as sharply
defined in those lights.

Technical Data

Housing

Aluminium Tube         25,4 mm
LED exposure              06 mm
With over all                37,2 mm
Height tube                  51 mm
DC-Index Socket         19 mm
Height over all             69 mm

LEDs
27 Superbright LEDs   5 mm
Lifetime                       100.000 hrs
Brithness each LED     20 cd (20.000 mcd)
Brightness total            540 cd (540.000 mcd)
Angle each                   20 –rows aligned in a Helix

Regulation
SMD PCB IC Design    no heating up
Input Voltage               8-30 Volt
                                Constant LED brightness
Polarity                        universal
Consumption                0,11 Ampere at 12 Volt
                                0,05 Ampere at 24 Volt
DC- Index Socket        Double Contact Index
                                No ground on the
                                housing and socket.

Warranty                    One Year after purchase

Cluster         3 independent Cluster. If on LED

Safety          of a cluster fails, the other two
                cluster (18 LEDs) still run.

Operating Instructions

                This LED light is designed to
                 replace the 10/25 watt bulb
                 with a double contact index
                 socket in vessels up to 65’
                 with a visibility range up to 3 nm.
                 Do not use this replacement bulb
                 for other applications but in
                 Hella Marine, Perko and Aqua
                 Signal Navigation lights.

Warning!    Not suitable to use in
                 Bi-and Tricolour Lights.
                 The lights are not yet inter-
                 nationally certified, so using is
                 at your own risk. Do not look
                 directly into the LED, as it may
                 cause severe eye injury.

Disclaimer:
Design and Specifications are subject to change without notice. In no event
will Lunatronic be liable for direct, indirect, incidental or consequential
damages, losses, cost or expenses however arising whether in contract or
tort including without restriction any economic losses of any kind, any loss or
damage to property, any personal injury, any damage or injury arising from
or as result of misuse or abuse, or incorrect, integration or operation of the
product.